Tag Archives: cyclooxygenase

qPCR – C.gigas COX1 on V.vulnificus exposure cDNA (from 20110311)

Ran a qPCR on all cDNA samples from the V.vulnificus exposure experiment from 20110111. Primers used were Cg_COX1/2_qPCR_F (SR ID: 1192) & Cg_COX1_qPCR_R (SR ID: 1191). Samples were run in duplicate. Master mix calcs are here. Plate layout, cycling params, etc., can be seen in the qPCR Report (see Results).

Results:

qPCR Data File (BioRad CFX96)

qPCR Report (PDF)

Data looks good (e.g. the replicates are all very close, with the largest Cq Std. Deviation = 0.534), nothing in the NTCs, & the melt curves look good. Will eventually normalize the data and then perform a complete analysis.

Bacterial Cultures – Colonies Selected from Yesterday’s Colony PCRs

Inoculated 5mL of 1x LB + Kan50 (made by Steven on 3/23/11). Incubated O/N at 37C, 250RPM. Will perform mini preps tomorrow. The following samples were selected:

  • MM09 – #1, 2, 8
  • MM11 660bp – #1, 2, 8
  • MM10 2/8/11 – #1, 2
  • MM04 1/19/11 – #2, 3
  • MM11 3000bp – #3
  • MM04 1500bp – #4
  • MM06 1/19/11 – #1, 2
  • MM04 550bp – #1, 2
  • MM05 1/19/11 – #1, 2

Bacterial Cultures – Colonies Selected by Steven from Steven’s Re-Streaked Plate

Inoculated 5mL of 1x LB + Kan50 (made by Steven on 3/23/11). Incubated O/N @ 37C, 250RPM. Will perform mini preps tomorrow. The following samples were selected (red text on the plate):

  • #9
  • #10
  • #13
  • #43
  • #45
  • #49
  • #56
  • #58

Colony PCR – Colonies from COX1 Genomic Cloning (from 20110411)

Ran colony PCR on various colonies produced from cloning on 20110411. All colonies were picked, re-streaked on Kan50 plate(s) and PCR’d. Master mix calcs are here. Cycling params:

  • 95C – 10mins

40cycles of:

  • 95C – 30s
  • 55C – 30s
  • 72C – 3mins
  • 72C – 10mins

Results:

Colony PCR – 5’RACE Colony: COX2 (repeat of yesterday’s PCR)

Repeated yesterday’s PCR on the re-streaked colony in order to run the product on a gel with a more appropriate ladder. See yesterday’s entry for all PCR info.

Results:

Lane 1: Hyperladder I

Lane 2: colony PCR

Lane 3: NTC

A band of nearly ~950bp is seen in the colony PCR, suggesting that the cloning reaction was successful. However, this does not match up with the expected size of ~1500bp seen on 20110407. Will sequence this regardless. Also, the gel on 20110407 may not have run properly (see image from that dat), which could possibly explain why we don’t see the “expected” size band of ~1500bp? Will inoculate a liquid culture for mini prep for eventual sequencing.

Colony PCR – 5′ RACE Colony: COX2

One white colony (marked with arrow in image linked) from the two plates from Steven’s cloning (from yesterday) was picked, restreaked on a new Kan50 plate (no X-gal) and PCR’d.

Master Mix:

2x Apex Red Master Mix – 25uL

10uM M13 Forward – 1uL

10uM M13 Reverse – 1uL

H2O – 23

Added 25uL to each PCR tube.

Cycling Params:

  • 95C – 10mins

40 cycles of:

  • 95C – 30s
  • 55C – 30s
  • 72C – 2mins

1 cycle:

  • 72C – 10mins

Results:

Lane 1: Hyperladder IV

Lane 2: colony PCR

Lane 3: NTC

Turns out the Hyperladder IV (this gel was run in the Friedman Lab) only goes up to 1000bp. So, the band we see in the colony PCR reaction could be close to the expected size if the insert is present (~1500bp). Although, we also see a band in the NTC. Will repeat this PCR and run on a gel with a more appropriate ladder…

Colony PCR – 5′ RACE Colonies

Two light blue colonies (there were no white colonies) were picked, restreaked on a new Kan50 plate (no X-gal) and PCR’d.

Master Mix:

2x Apex Red Master Mix – 37.5uL

10uM M13 Forward – 3uL

10uM M13 Reverse – 3uL

H2O – 46.5

Added 25uL to each PCR tube.

Cycling Params:

  • 95C – 10mins

40 cycles of:

  • 95C – 30s
  • 55C – 30s
  • 72C – 2mins

1 cycle:

  • 72C – 10mins

Results:

The two pale blue colonies do NOT contain our desired insert. Despite the presence of a larger, faint band (~950bp), that is far smaller than our 5’RACE insert size (~1500bp). And, clearly, the primary amplicon produced is ~250bp, which is the expected size for empty vector… Ladder is Hyperladder I (Bioline).

Will need to re-do ligation reaction and will do so at the recommended volumes in the TOP TA (Invitrogen) protocol.

Ligations – COX1/COX2 PCR Products

Performed ligations/cloning on a variety of COX1 genomic and COX 5′ RACE products using the TOPO TA Cloning Kit (Invitrogen). Used 2uL of gel-purified PCR product in each cloning rxn, 2.5uL of H2O, 1uL of salt solution, and 0.5uL of the Invitrogen pCR2.1 vector. Incubated samples for 5mins at RT. Used 2uL of the cloning reaction to transform TOP10 chemically competent cells (Invitrogen), mixed very gently, incubated on ice for 5mins, heat shocked at 42C for 30s and immediately placed on ice. Added 250uL of SOC Medium and incubated tubes at 37C, 200RPM for 1hr. Plated 50uL of each transformation on LB+Kan plates (made by Steven on unknown date with unknown Kan concentration) containing 40uL of 40mg/mL X-gal. Incubated O/N at 37C. Remaining volume of transformed bacteria were stored @ 4C.

5’/3′ RACE PCRs – Nested PCRs for COX2 Sequence

Due to the failure of the primary PCR on both 5′ and 3′ RACE cDNA libraries (from 20080619) yesterday, will perform nested PCR using a nested GSP designed by Steven (CgPGSRACEsrNGSP1; SR ID:1209). The 5uL of PCR reactions that were set aside yesterday were diluted to 250uL with tricine-EDTA (supplied with the Clontech SMARTer RACE cDNA Amplification Kit) as instructed in the Clontech manual. The master mix and tube layouts were exactly the same as yesterday’s, but instead of using 2.5uL of RACE cDNA library as template, I used 5uL of the diluted PCR reaction. Additionally, Universal Nested Primers were used instead of the Universal Primer Mix (both supplied in the kit). Cycling parameters followed “Program 2″ from the Clontech manual for 25 cycles.

Entire PCR rxns were run on a 1.2% gel, as instructed by the Clontech manual.

Results:

So….. What we see here is a melted gel!

But! We also see a successful PCR! The first three lanes (excluding the Hyperladder I) are 5′ RACE rxn, followed by two different negative controls (the negative control in the last lane is the one we’re really concerned with and it’s totally clean). The next three lanes are the 3′ RACE rxn, followed by two different negative controls (the negative control in the last lane is the one we’re really concerned with and it’s totally clean). As hoped/expected, we got a nice, clear product in the 5′ RACE rxn.

The bright band (~1500bp) in the 5′ RACE rxn PCR was excised and purified using Millipore Ultrafree DA columns according to protocol. Will clone and sequence this product.